RMD series dehumidification dryer feeding three machines
Is the combination of the actual situation of the plastics industry and developed new products. The machine uses a unique multi-stage honeycomb wheel, stainless steel double-blowing under the insulation gate, Taiwan-made feed fan, Germany's Siemens, Japan Omron, Japan and other brand-name electrical parts. Because the machine is concentrated dehumidification, drying, feeding for the three in one, in the production of plastic with fast and simple, compact structure, durable and so on, allowing you in plastic molding, to ensure quality and fully demonstrate the perfect physical properties of plastic, and then enhance Competitive strength.
RMD three machine features:
★ set two paragraph feeding, dehumidification, drying function as a whole, but the control can be independent operation.
★ Japan imported microcomputer P.I.D automatic adjustment, can automatically control the machine running.
★ 24-hour automatic timer can be scheduled to turn off the machine.
★ unique blown double-layer upset on the design, to prevent heat loss, save energy.
★ sealed loop feeding system, to avoid drying of raw materials due to contact with the outside air and then damp.
The third step: PC raw materials corresponding to the drying capacity of 67KG (generally slightly larger than the theoretical value)
The fourth step: 67KG corresponding to the temperature model RD120 is the correct model.
The main reason for the poor quality of bubbles such as bubbles, crayons, cracks, flow marks and poor transparency is that they have not been fully dried before the plastic has been formed. Engineering plastics such as PA, PC, PBT, PET, NYLON and other hygroscopic Of the raw materials, due to the influx of water into the plastic particles inside the traditional dryer is unable to make it completely dry.
It has been proven to reduce the dew point of the dry wind to below -40 degrees while controlling the heat to blow it over the surface of the wetted plastic pellet to reduce its moisture content to less than 0.02% before molding. The honeycomb-type dehumidifier is in a closed circulatory system will be fully dehumidified air, and quickly the plastic particles in the water completely out of the heart to achieve the effect of dehumidification drying
In the process of raw materials, the use of strong dehumidification performance of the honeycomb wheel, the air is fully absorbed in the water, the formation of low dew point, moisture absorption capacity of the strong raw materials dehumidification dry use.